Skip to main content
There is nothing to show here!
Slider with alias quality not found.

AIR WASHER / AIR COOLING UNITS

Packaged Type Paper Fill, PVC Fill, Single or Double Bank Water Spray and Unitary Types Air Washers / Air Cooling Units are available from 60% to 95% saturation efficiency and a capacity range from 5000 m³/hr to 150,000 m³/hr suitable for use with duct systems. The equipments are provided in sheet steel fabricated housing with several advanced features to give more efficient cooling and dependable service life.

CHILLING UNITS

Package type water-cooled chilling units and Air-cooled chilling units are available from 3TR to 60 TR capacities in sheet steel fabricated housing with removable casing panels to easy access in to the unit. Chilling units of Voltas / Blue Star / LG make are also supplied.

PACKAGED & SPLIT AC UNITS

Air Cooled and Water Cooled Packaged AC units are available in 5.5 to 22 TR capacities suitable for use with duct system. Ductable, Ceiling Suspended, Wall Mounting Split AC Unit and Window AC Unit of Voltas / Blue Star / LG make are also supplied.

AIR HANDLING UNITS

Air handling units are available in single and double skin configuration from 5000 m³/hr to 100,000 m³/hr capacities.

 

AIR CONDITIONING EQUIPMENTS

Chillers, condensers, direct expansion cooling coils, chilled water-cooling coils, fan coil unit, cooling towers etc.

 

AIR WASHER & VENTILATION EQUIPMENTS

Air distribution plates/ louvers, water drop & mist eliminators of PVC/GI, G.I. wire mesh/HDPE air pre filters, HDPE air fine filters, self cleaning auto viscous filter, water atomizing nozzles of brass/ nylon/ HDPE/Poly carbonate, Honeycomb Designed PVC Fills and Cellulose Paper Fills, Grilles, Diffusers, air volume control damper, fusible link / motorized / pneumatically operated fire dampers and air tight doors.

 

 

CENTRIFUGAL BLOWERS

Low, medium and high pressure rating blowers in single inlet single width design are available in the following range: Capacity : Up to 200000 m³/hr Pressure : Up to 1000 MM of WG

LIMIT LOAD FAN

Centrifugal Fan of limit load characteristic having double curved backward discharge tip blades impeller and scroll casing with stationary directional guide vanes in single inlet single width & double inlet double design are available in the following range: Capacity : Up to 250000 m³/hr Pressure : Up to 250 MM of WG

 

FORWARD CURVED FAN

Centrifugal Fans with forward curved impeller in double inlet design are available in the following range: Capacity : Up to 125000 m³/hr Pressure : Up to 80 MM of WG

 

 

AXIAL FLOW FANS

Axial flow fans are available in propeller and tube casing type having cast alloy aluminum fixed or variable pitch aerodynamic blades impeller suitable for direct or ‘V’- drive arrangement in the following range: Rotor Diameter : 300mm to 1600mm Capacity : 1000 m³/hr to 180000 m³/hr Pressure : Up to 70mm of WG

 

 

 

ROOF EXTRACTORS

Roof extractor fans are available from 300m to 800mm diameter and capacity range from 1000 m³/hr to 30,000 m³/hr. Roof Ventilators are also supplied.

 

 

 

 

SPRAY PAINTING BOOTHS

Spray-painting booth of different sizes both with & without water recirculation pump..

 

 

FUME SCRUBBERS

Fume scrubbers size in packed bed configuration with Ducting and Hood and capacity range from 2000 m³/hr to 30,000 m³/hr.

 

 

 

CYCLONE TYPE DUST COLLECTORS

Cyclones size 400 mm to 2250 mm diameter and capacity range from 1000 m³/hr to 30,000 m³/hr.

 

 

 

 

PULSE JET BAG FILTERS

Rectangular / Cyclonic design pulse jet bag filters suitable from filtration area from 9 M² to 300 M² and capacity range from 2000 m³/hr to 25,000 m³/hr.

 

 

 

 

 

AIR CONVEYANCE DUCTING

Rectangular / Round ducting made out of GI / MS as per IS: 655 or customer’s requirement.

ELECTRICAL MOTOR & PUMP

Energy efficient TEFC squirrel cage induction motors of ABB/Siemens/Crompton make and mono block / Back pull out / horizontal split casing water pump of Kirloskar / Crompton / Beacon make.

 

MCC PANEL

Non- draw out type electrical panel in 14/16G CRCA vermin proof sheet steel fabricated construction duly powder coated incorporating various components/ switchgears of L&T / Siemens / Schneider make.